|
|
Headlight Armor Home
click smaller images to enlarge
|
3D Carbon Fiber Film 12" x 27" Car Radio Dash Surround & Console
|
HX30CA890B-radio-2
|
|
Get the Dry Carbon Look for your car radio dash surround & center console. Also good for other automotive trim accents / switch plates etc. 12" x 27" sheet.
|
Detailed Description
|
Carbon Fiber is one of the hottest looks, and now with this revolutionary
material, it is within reach of everybody!
This is the perfect size for the center stack radio surround and console around the shifter on the 2005,
2006, or 2007 Subaru Impreza's, WRX's and STI's. As well as a
variety of others. Measure what you want to cover - adding some extra to the
length and width for wrapping & handling - and pick up the appropriate size today!
This revolutionary material is manufactured
by Hexis S.A. under ISO 9001 standards. HX30000 films are Cast vinyls specially
designed for full vehicle wraps - unlike other materials you may have seen from
other manufacturers. The film is a multi-layered 3D / textured / structured cast PVC vinyl. It's
textured / 3D / woven looking surface catches light just like true dry carbon giving it a rich depth
as well as a tactile response! Because of its
extreme flexibility, high conformability, HEX’Press adhesive facilitates air
egress thus avoiding bubbles and creases during application - fast and risk free
applications are practically guaranteed. It is particularly recommended for
complex compound curved surfaces and long-term outdoor applications. Hexis
HX30000 is the ideal high-end solution for vehicle applications with long life
cycles.
The material is very flexible and highly conformable. What can you cover? You
can overlay almost anything with a clean smooth surface! Popular applications include smart
phones, laptop cases, other electronics. Popular vehicle applications include
the roof panel, hood, trunk lids, spoilers, chrome trim, interior trim and
more. The list really does go on!
|
|
Manufacturer Photos: |
 |
 |
 |
 |
| Hexis Carbon Film is similar to 3M's Di-Noc
Architectural Film that you may have heard of or seen, but it has some
major differences that make Hexis THE clear choice for automotive
applications over 3M's Di-Noc! |
| |
Hexis Carbon |
3M Di-Noc |
| Designed for automotive and exterior use in mind? |
Yes |
No - Di-Noc was designed as an interior
Architectural Finish |
| Removable at some point down the road? |
Yes fully reversible |
No*
Not without significant damage to what it was applied to |
| Dimensionally stable after thermoforming on complex
surfaces? |
Yes |
No*
Surface primer (adhesion promoter) necessary |
| Exterior application life expectancy - vertical
application? |
3-5 Years depending on climate (will
last longer in northern climates) |
3-4 years (will last longer in northern
climates) |
| Exterior application to a horizontal surface? (ie
Hood, Roof, Trunk overlay) |
Yes with 40% reduction in life over
vertical application if unprotected |
No, not recommended at all |
| Seamless application on large surfaces? |
Yes in most cases - Max width is 60
inches / 1520 mm |
Maybe but Max width is only 48 inches /
1218 mm |
|
|
|
|
Web Forum Links
Secure Shopping
Shipping Info
Privacy Policy
Store Policies
|
|