15-18 Ford Focus ST Fog Light Protection Film
* denotes required field
Select Film Choice*
(Only one item needed per vehicle)
Protect your fog lights with our adhesive backed lighting protection film. Made to order in the USA for your 2015, 2016, 2017 or 2018 Ford Focus ST
Part Number: MA-FD055F2-
Details: Headlight Armor Fog Light Protection Film is designed toprotect your vehicles' lights from impact damage and surface erosion that leads tohazing / clouding / fading and discoloration. - Impact resistant 15 mil thickness (2X typical PPF)
- Available clear or tinted
- User friendly acrylic adhesive
- Typically installed in a few minutes per lens
- Includes sections for both left and right lights
Most applications have a designed in tolerance around the perimeter of thelens to facilitate a smooth installation and provide good long-term performance.The more dome your lens has, the more patience and time will be required to install. All applications are removable but cannot be removed and reapplied once the adhesive has set. Options: Clear: - Protect your fog lights without changing the look of your vehicle
Unprotected and Broken Fog Light: Protected Fog Light: GT Yellow: - Yellow lights day & night
- Very strong traditional yellow output
- Better visibility in rain, snow and fog
GT Yellow Fog Light Protection Film: GT Yellow Fog Light Protection Film: HID Blue: - Modern blue look during the day
- Shines through bright white at night
- Gives non-HID lamps the HID look
HID Blue Fog Light Protection Film: HID Blue Fog Light Protection Film: Light Smoke: - Tones down the chrome of the reflector
- Subtle factory smoked look
Light Smoke Fog Light Protection Film: Light Smoke Fog Light Protection Film: Smoke: - Significantly darkens your fog lights
- Great for those looking to 'hide' the fog lights
- Cover up an already cracked fog light until the light assembly is replaced
- Once these are applied it is not anticipated the lights would be used
Smoke Fog Light Protection Film: Smoke Fog Light Protection Film: * Car manufacturers warn you about not replacing any of your bulbs with higher wattage versions, and so do we. Higher wattage bulbs may cause reflector / lens / housing failures even without lighting protection film. As using these covers may decrease the lens' ability to dissipate heat (more applicable to fog lights than to headlights), we also recommend that you refrain from using higher wattage bulbs in conjunction with our high performance covers. We also suggest turning your fog lights off while you vehicle is stationary - stuck in stop and go traffic for example. * Check your local laws before installing on road going vehicles as they may or may not be legal on your primary lighting in your state.
Professional grade microfiber detail cloth. Measures ~12 inch x 16 inch (~30cm x 40cm). Highly recommended for DIY installation of all of our Headlight Protection kits and Smoked Taillight kits. Made in S Korea.
| | | |
|
|