Custom SCCA Vinyl Autocross Number Decals

click smaller images to enlarge
: Starting at $33.00

* denotes required field

Car Number (Two Digits)*
Car Class (All CAPS)*
Font (see Overview)*
Need a # '1' for a co-driver?*


These SCCA Approved Adhesive Backed Vinyl Numbers are made from premium 2 mil cast vinyl. Up to 10 yr durability for colors, 12 for black / white. Once Package and Color are selected, total price will be displayed. Sold in sets, one for each side.

send us your best photos

Product Overview

Headlight Armor is now offering custom made premium cast vinyl SCCA Autocross and track day vinyl numbers! All number and class decals are made to order and sold in pairs / sets (one for each side of the vehicle). They are available in a variety of sizes from 8 inch Numbers to 14 inch Numbers. 8 inch is the SCCA's Minimum size. We suggest going with the largest size that will fit on your door for maximum visibility. Rules state the numbers should be a high contrast color, so Matte Black on a Black car is not going to be a good choice. These are adhesive backed, they can be removed without damage to the paint, but are only designed to be applied once. We use some of the best vinyl you will find, rated at up to 10 year durability for colors and 12 for black and white. Leave them on for seasons, or just your big weekend event, your choice.

Your Decals will come as a three layer decal spaced and ready to apply. Backing paper, vinyl number / numbers and class, and a layer of pre-mask tape. To apply clean surface thoroughly. Line up you lettering when you want it on the door, and use some painters tape (you provide) along the top edge of your decal. The decal will then hang in place. Lift bottom and slowly remove backing paper - exposing adhesive on your numbers. Hold away from the surface of your door and squeegee (with supplied squeegee) back and forth from the very top all the way to the bottom. Once fully applied, go over entire decal with firmer pressure on the squeegee. Wait a few minutes, then slowly peel back the pre-mask revealing your new vehicle numbers.

Removal down the road is straight forward. Just start at a corner and warm material with a hair dryer or heat gun, pick a corner up with your fingernail, and peel back.

To Order:

- Select your package (size / number / number and class)

- Select color and the site will then calculate the total price as it varies with size and combination.

- Enter you car number in the Car Number box provided (up to two digits)

- Enter your class letters in the Car Class box.

- Next select your font.

Current Approved Fonts:

Arena Black
Arial Black
Ergoe Black
Frankfurt Heavy
Giligan Extra Bold
Hammer Fat
Kabob Black
Universal Black

SCCA Rule:


A. All vehicles must display numbers and class letters on both sides, which must be readable by Timing and Scoring, Course, and Grid workers at all times.

B. Only one set of numbers and class letters may be visible while the vehicle is running.

C. Class shall be represented by the upper-case abbreviated form rather than be spelled out. Ladies classes shall be indicated by the letter L following the class letters. (Example: BSPL instead of B Street Prepared Ladies).

D. Numbers and class letters should be positioned next to each other. All letters and numbers must be on body panels, not on windows. All numbers and class letters must use the same typeface and the same color, and this color must provide adequate contrast to the background color (see Appendix F for examples).

E. Numbers must be a minimum of 8 high with a 1.25 stroke. Class letters must be a minimum of 4 high with a 0.75 stroke. In all cases, the height of the class letters must be between 25% and 75% of the height of the numbers. Stroke width must be at least 10% of the height.