| | |
|
Looking to Smoke out your Taillights? HeadlightArmor smoked taillight kits are a much better alternative to taking your tail lights
apart and painting the inside (paint can be uneven and it is permanent), painting the outside with a product like VHT Nightshades,
or some 'stained glass' paint you find at the hobby store. They are also better to the old fashioned clip-on / tape-on hard plastic /
acrylic tail light kits that are easily stolen, and much cheaper than buying OE style smoked replacement housings or lenses.
Do not confuse these with 'overlays', as most overlays are typically made from 2-3mil vinyl that is designed for signs and
provide no real protection to your expensive lights. Our tough film also helps protect against everyday road hazards that can damage and destroy your vehicle's very expensive
lights, such as shopping carriages, careless shoppers and the like. The material is removable but you can only apply it once after
the adhesive has cured. All this while giving your vehicle a distinctive look!
Use the above Shop By Vehicle Drop down or search tool to find applications for your specific vehicle.
Daytime Visibility Testing Video: 20% Stealth Smoke Taillight Kit (Darkest Available)
Left Side Light Smoke Right Side Stock 1000 Feet - Running Lights
Left Side Smoke Right Side Stock 1000 Feet - Running Lights
Left Side Dark Stealth Smoke Right Side Stock 1000 Feet - Running Lights
See full night taillight film testing photos HERE
HeadlightArmor High Performance Smoked Taillight film kits are precision cut with a computer to fit your vehicles lights.
They are made from our heavy-duty premium 15 mil thick material with a clear acrylic adhesive backing for excellent durability
and strength! They applied in a manner similar to clear bras, tints, and vinyl stickers and graphics.
HeadlightArmor smoked taillight kits are available in three different tint levels. Our Light Smoke taillight Film kits allow ~50% light transmission and give
a nice subtle factory smoked look to your taillights. Our Smoke covers allow ~30% light transmission; and look pretty dark when you look at your taillights as
most are going over a red/dark red lens. During the day they turn a bright red taillight a rich deep dark burgundy. In lower lighting conditions they look even darker.
At night our smoke covers do not have such a large impact; the running lights, reflectors, and brake lights are clearly visible! If you were following somebody with
the covers installed in a group of 10 different cars you would probably be hard pressed to guess which vehicle had our smoked taillight kit installed.
The Stealth Smoke covers allow ~20% light transmission and look very dark when installed - great for show cars!
Most kits can be installed in 15-45 minutes. Take a look at your headlights, the more steep angles and bulges they have the more patience
will be required to install these protective covers. If you don't feel confident about applying the film on your own, seek out the help of a friend.
The material is removable but you can only apply it once after the adhesive has set.
They are a better option than trying to paint your lights with some form of stained glass paint which can chip and flake off.
Please Note: Check your local laws before installing on road going vehicles as they may or may not be legal on your primary lighting in your state.
| |
| | |
|
|