Standard 7" x 6" Rectangular Headlight Protection Film
* denotes required field
Select Film Choice*
(Only one item needed per vehicle)
Protect your headlights with our adhesive backed lighting protection film. Made to order in the USA for your 7 x 6 inch rectangular traditional sealed beam / halogen headlights. Sold in pairs.
Part Number: MA-SH003H-
Details: Headlight Armor Headlight Protection Film is designed to protect your vehicles' lights from impact damage and surface erosion that leads to hazing / clouding / fading and discoloration. - Impact resistant 15 mil thickness (2X typical PPF)
- Available clear or tinted
- User friendly acrylic adhesive
- Typically installed in under 15 minutes per lens
- Includes sections for both left and right lights
- Includes application squeegee
Most applications have a designed in tolerance around the perimeter of thelens to facilitate a smooth installation and provide good long-term performance. If your lens has a steep contour your application may come with a relief cut or notch. This is done to improve the install and insure long term performance. The more steep angles and bulges your lens has, the more patience and time will be required to install. All applications are removable but cannot be removed and reapplied once the adhesive has set. Options: Clear: - Protect your headlights without changing the look of your vehicle
Unprotected Headlight: Protected Headlight: HID Blue: - Gives non-HID lamps the HID look
- Designed to mix with halogen light output and shine through bright white
- If you already have HID's these will enhance the look even further
HID Blue - Day: HID Blue - Night GT Yellow: - Give your vehicle that aggressive racing look during the day
- Lights will shine a strong yellow at night
- Better visibility in rain, snow and fog
- Widly seen in sports car racing
GT Yellow - Day: GT Yellow - Night: Light Smoke: - Tones down the chrome portions
- Subtle factory smoked look
- Impacts overall light output, but significantly less than the Smoke
Light Smoke - Day: Light Smoke - Night: Smoke: - Give your vehicle a smooth mean look
- Similar effect to night visibility as would having your entire windshield tinted
Smoke - Day: Smoke - Night: * Check your local laws before installing on road going vehicles as they may or may not be legal on your primary lighting in your state or country.
Professional grade microfiber detail cloth. Measures ~12 inch x 16 inch (~30cm x 40cm). Highly recommended for DIY installation of all of our Headlight Protection kits and Smoked Taillight kits. Made in S Korea.
| | | |
|
|